Skip to product information
OR-34A O-Rings for Culligan HF-150, HF-150A, HF-360, HF-360A, Ace 45025 46764 49560 (2 Sets, 4 O-Rings)
1/6

OR-34A O-Rings for Culligan HF-150, HF-150A, HF-360, HF-360A, Ace 45025 46764 49560 (2 Sets, 4 O-Rings)

CT-A7WI-BPDI
$10.99
In Stock. Ships within one business day.
    • O-Ring Set Part Number: OR-34A (Also called OR-34, OR-34B)
    • Compatible with Culligan HF-150, HF-150A, HF-160, HF-360, HF-360A, Ace 45025, 46764, and 49560.
    • This kit includes two (2) o-ring sizes. Two (2) of each. 2x Smaller "A" O-Ring and 2x Larger "B" O-Ring. Four (4) o-rings total in the package. See photos for o-ring dimensions.
    • Molded from NSF 61 certified buna-n rubber for safe and clean drinking water.
    • Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!

    Before replacing the o-ring, refer to the bottom of the sticker on of your Culligan filter housing. Two different o-ring sizes are enclosed: 

    Sticker plates coded "Rev C" or higher, for models HF-150A, HF-360A, and Ace 45025 housings should use the smaller o-ring enclosed.  It is the same as the  OR-150 o-ring.

    Sticker plates coded "Rev A" or "Rev B" for models HF-150A and ALL other models (HF-160, HF-360, HF-365, Ace 45025, Ace 46764, Ace 49560) should use the larger o-ring enclosed.  It is the same as the 151120 o-ring.

    The smaller “A” o-ring in this kit measures 3.73” Inside Diameter (just under 3-3/4” ID), 4” Outside Diameter, 0.140” Thick (just over 1/8” Thick). The larger “B” o-ring in this kit measures 3.85” Inside Diameter (about 3-7/8” ID), 4.13” Outside Diameter (about 4-1/8” OD), 0.140” Thick (just over 1/8” Thick).

    Note: The o-ring labels seen in the picture are just for representation. The o-rings can be identified by their size difference in the package using the instructions above to determine the correct size for your filter. 

    These o-rings are made of NSF61 certified nitrile butadiene rubber (Buna-N) which are certified for safe use in drinking water systems and offer superior flexibility and resistance to tearing during installation and long-term use.

    Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!

    You may also like